Lookah - Seahorse Pro Plus - Assorted Colors

The Seahorse Pro Plus features a manual and session mode for dabbing concentrates. Turn on/off the Pro Plus wax pen by pressing the power button five times quickly. Changing the Voltage Level: Press the power button twice quickly to switch between the three voltage settings. A different color light around the power button indicates each voltage setting. Mode 1: 3.2V (Blue) Mode 2: 3.6V (Purple) Mode 3: 4.1V (White) Vaping with the Seahorse Pro Plus: Press and hold the power button to heat the quartz tip coil to the desired temperature. After a few seconds, start dabbing in manual mode. While inhaling, run the quartz tip of the seahorse pro plus along the edge of the concentrate, making sure not to dip the tip directly into the concentrate. Pressing the power button three (3) times activates the session mode. The vaporizer pen enters a 15-second pre-heat indicated by a flashing light. The temperature is set for 30 seconds, enough time for an intense dab session. You can use the Seahorse Pro Plus dab pen with a water pipe. Place the adapter into the downstem. Connect the green hose and place the other end over the mouthpiece of the Seahorse Pro Plus. Two accessory packs for the Seahorse Pro Plus (sold separately) are available. A stand for the device and a glass water bubbler accessory pack. The bubbler replaces the glass mouthpiece and offers cooler water-filtered dabs. Note: To ensure the quartz tip last as long as possible, make sure you burn off all the residue in tip coil after each use - just run an extra heat cycle. If you allow concentrates to build up on the tip or inside the airways, it can affect the taste and ruin your dabbing experience.